Forward Controls Design AR-15 RHF Railed Handguards
Forward Controls Design RHF (Railed Handguard, Forward Controls) is based on the superb CMT UHPR Mod2, with full length 1913 rails at 12 o'clock, and MLOK at 3, 6, and 9 o'clock.
RHF is machined from 6000 series extruded aluminum, its barrel nut is machined from 7075 aluminum, both are Type 3 anodized, while the rail mounting hardware is machined from 17-4 PH (patent pending). The RHF also incorporates anti-rotation tabs. Some upper receivers may not fit the anti-rotation tabs (BCM Mk2 is one such example).
RHF's inside diameter is 1.315" and compatible with most low profile gas blocks. Barrel nut diameter is 1.378", barrel nut wrench is included.
The RHF incorporates design input from Forward Controls, such changes include:
- Omission of QD swivel attachment points. Location of the front sling attachment is left to individual users, recommended to use a steel QD mounting point
- Barrel cooling vents changed to the classic round shape. One might say we're paying homage to Knight's Armament's RAS and RIS where meaningful modular revolution began.
- Simplification of the already understated aesthetics of the CMT UHPR Mod 2 handguard.
Available in 15", 13.7", 12.8", 11.5", 9.5", and 6.7".
Weight of each length as follows (total weight, including mounting bracket and bolts):
- 6.7", 6.5oz
- 9.5", 8.54 oz
- 11.5", 9.5oz
- 12.8", 10.95oz
- 13.7", 11.5oz
- 15", 10.9oz
Barrel nut torque: milspec 40-70ft/lbs
Rail clamp screws torque: 45 inc/lbs
|Shipping Restriction||ITAR/Export Restricted|
|Barrel Rest||Free Float|
|Finish||Type III Class 2 Hardcoat Anodized|