Forward Controls Design AR-15 URF V3 Upper Receiver - Stripped

URF v3 is a follow on development of URF-B v2, and despite the difference in looks, shares the same features. Once the URF V3's production can meet demand, it will replace the URF-B v2 altogether.

Features:

• Machined from 7075 billet
• Type III hard coat anodized
• LMT MARS-L lower compatibility
• Compatibility with most MLOK and Picatinny handguards
• Beveled area in the upper rear section to allow easier folding backup sight access
• Hole above the gas tube hole for handguards that use a pin for anti-rotation.
• Beveled area for BUIS access is now on all three sides (left, right, and rear)
• Slightly wider receiver wall, this has the effect of forming a fence for the bolt catches
• Charging handle latch pocket changed to be closer to TDP spec (0.06) and tolerances while maintaining compatibility with 3rd party charging handles (many uppers have this pocket at 0.08, twice the TDP spec depth at 0.04, +0.000/0.02)
• Weight: 9.01oz.

Proudly designed and made in USA.

Please Note:
The URF v3's pivot pin and take down pin lugs are made according to TDP dimensions and specs, and aren't oversized in order to create a tight fit with any lower receiver.