The Hodge gas block is made to the exacting specifications used in the Hodge Defense rifles, including the coveted AU Mod 2, and made by SLR Riflesworks. The Hodge Carbine is set up and optimized around military grade M855 ammunition ran through a midlength gas system with a 16.0" Barrel. The Hodge Gas Block can be locked in with the set screw and reinforced with drill through pinning. Note for the ambitious gunsmiths, the dimpled recess makes pinning through easier but the hardened melonite finish will require competent machining, securely mounted in a vice, and a high powered drill with a quality bit. If there is any doubt, drop it off with your gunsmith!
The Hodge Gas Block is the same as the GB7. Available here.
- 4140 Billet Steel
- Melonite QPQ Finish
- 1.2oz Weight
- Fluted ribs machined into the gas block body
- Includes the set screw and roll pin
- Dimpled recess for easy drilling and pinning through
|Shipping Restriction||ITAR/Export Restricted|
|Barrel Journal||0.750 Inch|